INSTRUCTION MANUAL
Easy assembly
Follow our step-by-step instructions.
Required Tools
- Sun protection set (cassette, fabric, guides)
- Screwdriver with suitable bits
- Measuring tape
- Pencil or marker
- Sturdy step ladder
Checklist
1x Cable1x Remote ControlX Screws1x BitTransformer
Assembly Instructions
01 - Preparation
Remove the film. Pay attention to the numbering on the motor side.
02 - Removing trim strips
Click off all trim strips.
03 - Drilling the holes
Drill a 6–8 mm hole in the middle of the trim strip.
04 - Placement
Route the cable through the hole.
05 - Connection
Connect the wires to the terminals.
06 - Transformer
Mount the transformer.